


GoLine 80W
Projects a thick, permanent floor line that eliminates the need for
maintenance required by floor tape and paint lines.
- Designed for Industrial Environments
- Wide power range
- Wide temperature range
- Maintenance free, no fans or motors
- Adjustable line length option
Color Of The Projected Line
![]()
Features Of Projection
Type Of Projection
Lines
Tech Specs
Power Supply
100-240/277VAC, 50/60Hz (Volt.Range: 90-305VAC, 48-63Hz; 127-431VDC)
Power Draw
80W, 0.7A/115V, 0.3/277V
Inrush Current
COLD START 75A (twidth=570us at 50% Ipeak) at 230VAC per NEMA 410
Units per Breaker
20A Type C: 11 units, 16A Type C: 9 units
Power Cord
Length: 72” (1.8m), Plug: Nema 5-15 (cord is interchangeable)
Control Input Signals
1-10V, 10-100KOhm, PWM, Dry Switch (for on/off or dimming)
Environmental Rating
Driver: IP67, Projector: IP65
Safety Standars
EC: EN IEC 60598-1:2021, N IEC 60598-2-1:2021, Driver: UL E334687
Driver
Meanwell HLG or MOSO
Temperature Range
-13°F to 113°F (-25°C to 45°C)
Lamp Type
80W LED, multiple colors
Rated Life
LED: 35,000h (L70*), Driver: 192,000h
(*L70= the time to 30% brightness loss)
Projection Colors
Yellow, Green, Red, Blue
(colors are pre-configured and not interchangeable)
Line Width
75 to 125mm depending on projection distance
Projection Lenses
53° (1:0.93 throw ratio) 73° (1:1.4 throw ratio) 90° (1:186 throw ratio)
Typ.projection range
Bright Env. Average Env. Dim. Env.
Typ.Usable Line Length
8.5m 11m 18m
At typ. distance (dep. on lens)
4.6/6.3/9m 6/10/12m 9.7/13/19m
Line Length Adjustment
Yes, with optional blinders (the min.lenght is approx. 30% of full line lenght)
Product Warranty
2 years from date of purchase
Weight
5.3 kg
Size
29.2×24.6×30 cm
FAQ
Yes, the projectors and the gobos are produced by us and are 100% Made in Italy.
You can request a quote by sending an email to
No, the use is very simple: just follow the instructions given in the instruction manual.
The projectors have a 2-year warranty.
You can contact us by e-mail at
In order to carry out the study of a projection project, it will be necessary to provide us with the following information:
- The distance between the projector attachment point and the projection surface.
- A photo of the projection surface.
- The size of the area to be covered by the projection.
- The ambient light level.
- The graphics, if any, to be projected.
If necessary, it is possible, as an additional service, to include the creation of the projection graphics in the offer.
Not directly. Nonetheless, our network of partners may be of assistance in this regard.
Yes. We have an ever - expanding network of partners and distributors.
You will find mounting directions in your projector’s instruction manual.
We always ship a manual containing mounting instructions with our gobos.
To avoid damaging the gobo during use please follow the instructions below:
- Mount the Black and White Gobos with the gray side facing the lens.
- Mount the Color gobos with the black side facing the lens.
Operational Headquarters
Via 2 Giugno, 19/10
Bonate Sotto, BG, Italy
Español (España)
Français (France)
Italiano (it-IT)
English (United Kingdom) 



